5
Your Cart

The PIEPS Pro BT is the most advanced beacon, with a feature set built for the pro user.

Features:
– Extensive self-check review of all relevant hardware and software elements as well as showing the current software version.
– Perfectly readable display in all lighting conditions
– Vibration at initial signal detection. this lets rescuers focus on the visual surface search during the signal search.
– Perfect mark-performance due to exact signal processing without any performance losses
– Pieps interference protection the influence of external interferences is eliminated or reduced to a minimum: protection in send mode with auto-antenna-switch: if the transmitting antenna is impacted by external interference, the other antenna would take over the transmit function. protection in search mode with signal verification: only a verified 457khz signal is indicated.
– Iprobe support the pieps pro bt can be temporarily deactivated using the smart iprobe. the receiving beacon automatically receives the next strongest signal.
– Backup-mode the pieps pro bt is in send mode but the send signal is temporarily suppressed. so rescuers aren´t disturbed during the Search.
– Auto-search-to-send this function automatically switches the pieps pro bt from search mode to send mode, if the beacon is not moving for a certain time (in case of burial).
– Group check reviews the activity and transmission parameters of the partner device. pieps recommends to perform a group check before each tour.
– Scan-function the scan-function will give you an overview of all buried devices within the detectable range.
– Victim selection the pieps pro bt scans the entire receiving range. the closest 3 victims are indicated.
– Analog-mode the analog mode can be used for specific search strategies as well as for demo reasons.
– tx600-support the pieps tx600 is a mini-transmitter for dogs and equipment that is transmitting out of the standard en300718 and can be received with every pieps pro bt.
– Inclinometer with the integrated three dimensional inclinometer the the punctual angle of the slope can be measured.
– Carrying system pieps pro bt
– High wearing comfort at low weight
– Neoprene pouch with soft shoulder strap
– Quick-pull-system for fast access to the device

Specifications:
– Maximum range (m): 60
– Search strip width (m): 60
– Dimensions (mm, LxWxH): 118 x 76 x 29
– Weight (g, incl. batteries): 230
– Power supply: 3 batteries (AAA)
– Battery lifetime (min. h): 600
– Receiving frequency (kHz): 457
– Transmission frequency (kHz, according to EN300718): 457
– Temperature range: -20°C to +45°C

Color: Golden

Reviews

There are no reviews yet.

Be the first to review “Klim Pieps Pro BT Tracker”

Your email address will not be published. Required fields are marked *